Acrosser AR-B1622 Bedienungsanleitung PDF herunterladen (Seite 6)

AR-B1622 User’s Guide

2.2 SYSTEM SETTINGS

Jumper pins allow you to set specific system parameters. Set them by changing the pin location of the jumper

blocks. (A jumper block is a small plastic-encased conductor that slips over the pins.) To change a jumper

setting, remove the jumper from its current location with your fingers or small needle-nosed pliers. Place the

jumper over the two pins designated for the desired setting. Press the jumper evenly onto the pins. Be careful

not to bend the pins.

We will show the locations of the AR-B1622 jumper pins, and the factory-default settings.

CAUTION: Do not touch any electronic components unless you are safely grounded. Wear a

grounded wrist strap or touch an exposed metal part of the system unit chassis. The static discharges

from your fingers can permanently damage electronic components.

2.2.1 LCD1 (LCD CONNECTOR)

DEFINE

1 GND 2 FPCLK 23 D14 24 D15

3 GND 4 HSYNC 25 D16 26 D17

5 VSYNC 6 GND 27 GND 28 D18

7 D0 8 D1 29 D19 30 D20

9 D2 10 D3 31 D21 32 D22

11 D4 12 D5 33 D23 34 GND

13 GND 14 D6 35 LCDVDD 36 LCDVDD

15 D7 16 D8 37 12V 38 12V

17 D9 18 D10 39 GND 40 GND

19 D11 20 GND 41 DE 42 LVDS_BKLTEN

21 D12 22 D13 43 GND 44 ENVDD

2 1

44 43

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Keine Kommentare

Acrosser AR-B1622 Bedienungsanleitung Seite 6